Smart locks
House lockouts
Re-keying
Deadbolt upgrades
Schlage
Kwikset
Car keys & fobsNon-destructive entry first, always - and we re-key Schlage, Kwikset, and Baldwin locks on the spot while you watch
You get a price before we start. It does not change when we arrive. No surprises.
Get your free estimateSchlage Locksmith in Colma, CA | Cypress Lock & Key
We provide independent Schlage locksmith service across Colma, CA, and the thing that makes our work here different is this: nearly all of Colma’s lock hardware lives outdoors, in salt-fog and damp, attached to cemetery gates, chapel doors, and grounds-equipment sheds. That means Schlage cylinders seize, keypads fail, and levers bind faster here than they would in Daly City or South San Francisco. Call (877) 265-4385 and we’ll send a tech who knows Schlage hardware the way a Colma grounds crew knows its routes.
Why Colma Residents Choose Us for Schlage Service
We work on Schlage hardware every single week, and we’ve learned where it holds up and where it doesn’t. B60N deadbolts, F-Series knob sets, Connect keypads, ND-Series commercial levers. We stock genuine Schlage OEM cylinders, pins, and keypad boards, and we’re not shy about using an aftermarket weather seal where the factory gasket fails. This is a Schlage sales & service shop, not a call center that dispatches whoever’s near your ZIP. When you call, you get a tech who can identify your cylinder by sight and tell you whether it’s worth re-pinning or time to replace.
Noel Carver, our owner and lead locksmith, completed the locksmithing and security systems program at Fresno City College and has been running calls in this part of the Bay for nearly two decades. He’s the one who set our standard for Schlage work: re-pin before we replace, explain the failure in plain English, and never upsell a rebuild that won’t survive the fog. That matters in Colma, where damp air punishes every exterior lock from El Camino Real to Mission Street.
We’re an independent shop. Not authorized by Schlage, not endorsed by them. That’s a feature, not a gap. It means our repair-or-replace advice on a corroded Schlage cylinder or a dead BE469 keypad isn’t guided by a manufacturer’s replacement quota.
Styles & brands we work with
Common Schlage Locksmith Problems We Solve in Colma
- Seized B60N and F-Series cylinders from fog-belt corrosion. Colma sits right in the marine layer that pushes through the Daly City gap, and Schlage’s factory lubricant gums up inside the cylinder when salt-laden damp gets into the plug. You’ll feel the key start to stick, then bind. We re-pin and re-lube the cylinder with a weather-rated lubricant. If the housing is pitted beyond saving, we say so.
- Dead keypads and dropped Z-Wave pairing on Schlage Connect BE469 units. The BE469’s gasket wasn’t designed for Colma’s near-constant damp. Moisture gets behind the keypad, the board corrodes, and the deadbolt stops responding to codes or to your Z-Wave hub. We replace the board with OEM Schlage parts where possible and install an aftermarket weather seal on the replacement.
- Stuck Schlage levers and panic hardware on chapel and mausoleum doors. A lever that won’t turn at the exact moment a procession needs the door open is an operational crisis in Colma. We keep Schlage ND-Series levers and latch assemblies stocked for same-day replacement on cemetery doors and grounds buildings.
- Misaligned deadbolt latch bolts on older homes near the Daly City border. The few older single-family homes along the 94015 corridor shift and swell in damp air. A Schlage B60N bolt that once threw clean now grinds against the strike plate. We realign the strike, re-shim the jamb where needed, and replace the weather seal so the door doesn’t drink more fog into the hardware.
- Master-keyed gate systems that need rapid rekeying. Cemetery districts and funeral homes cycle staff and contractors constantly. We re-pin Schlage cylinders to the existing master key system without replacing hardware, so grounds crews and chapel staff get back to work the same day.
Schlage Service in Colma: What Local Conditions Mean for Your Equipment
Colma’s population is roughly 1,500 living residents against about 1.5 million buried, so nearly all of its land is cemetery. Holy Cross, Cypress Lawn, Olivet. The locksmith work here is overwhelmingly commercial and institutional: gate locks, mausoleum and columbarium hardware, maintenance-yard padlocks, and vehicle lockout calls for funeral-processional fleets. A Schlage gate lock in Colma has a very different duty cycle than a suburban front door. It has to stay secure overnight, but it has to open instantly at 10:40 a.m. when the procession pulls up. That’s why we stock Schlage OEM cylinders and spring-loaded levers locally rather than ordering them. When a cemetery district on the Mission Street corridor calls us because a Schlage ND-Series lever on a grounds-equipment shed corroded shut before an afternoon burial, we can’t tell them to wait on a parts shipment. Our tech freed the seized cylinder, re-pinned it to the district’s master key, and swapped the worn lever for a fresh Schlage unit with a weather seal. The shed was back in service before the procession arrived, and we re-lubed the matching chapel lock on the spot.
Schlage Models & Products We Service in Colma
We carry parts and service for the Schlage lines we see most in Colma: the B60N single-cylinder deadbolt, the F-Series F51 and F58 knob and lever sets, the BE365 keypad deadbolt, the BE469 Connect smart deadbolt with Z-Wave, and the commercial ND-Series cylindrical lock. Our approach on parts is simple. We use genuine Schlage OEM cylinders, pins, and keypad boards because they match the lock you already have. Where the factory part is the weak point, like the BE469’s gasket, we reach for quality aftermarket weather seals that actually hold up in Colma’s salt-fog. We keep the common Schlage cylinders and lever assemblies stocked locally so Colma customers aren’t waiting on a distributor.
Schlage Service Pricing in Colma
Schlage locksmith work in Colma runs on straightforward labor and parts, no mystery line items. A Schlage B60N deadbolt rekey or cylinder re-pin typically runs $35 to $75 per cylinder. Replacing a corroded Schlage F-Series knob or lever set with new hardware typically falls in the $90 to $190 range per door, parts included. BE469 keypad board replacement depends on the board and the damage; call (877) 265-4385 and we’ll quote the job over the phone before anyone is dispatched. The price we quote is the price on the invoice. No call-out surcharge added at the door. Master-key and commercial Schlage work is surveyed and scheduled with a written scope and a flat per-lock price.
Serving Colma, CA — Our Local Coverage Area
We’re based in the Colma area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Schlage Locksmith in Colma
Residential rekeys are rare in Colma because so few homes exist, but they’re absolutely worth it when a property changes hands or a tenant moves out of one of the older single-family homes near the Schlage in Pacifica corridor or the Daly City border along the 94015 ZIP. A Schlage rekey costs less than replacing the hardware and gives you immediate control over who holds working keys. If you’ve bought one of the few residential properties along the El Camino corridor, call (877) 265-4385 and we’ll re-pin every exterior Schlage cylinder to a fresh key.
No. Cypress Lock & Key is an independent Schlage service provider, not an authorized dealer or factory-affiliated shop. That independence means we recommend repair or replacement based on the condition of the hardware in front of us, not on a manufacturer quota. We know Schlage’s residential and commercial lines well enough to say when a cylinder can be re-pinned and when it’s done.
Genuine Schlage OEM cylinders, pins, and keypad boards for the lines we service in Colma. Where the factory part is the known point of failure, like the weather gasket on a BE469 keypad, we install a quality aftermarket seal that outperforms the original. We’ll tell you on the phone which parts your job needs and why.
A standard Schlage rekey or cylinder re-pin takes 20 to 45 minutes once we’re on site. A keypad board replacement on a BE469 usually runs under an hour. Commercial gate and master-key work across the cemetery districts is scheduled with a written scope, and Colma’s institutional clients get priority during active service days because a stuck chapel door stalls a burial. Call (877) 265-4385 for today’s availability.
B60N single-cylinder deadbolts, F-Series F51 and F58 knob and lever sets, BE365 keypad deadbolts, BE469 Connect smart deadbolts with Z-Wave, and ND-Series commercial cylindrical locks. If you have something older or less common, describe it on the phone and we’ll tell you whether we can get parts for it before you commit to a service call.
A rekey runs $35 to $75 per cylinder. New F-Series hardware runs $90 to $190 per door, installed. Commercial and master-key work is quoted per job after we see the site. The price we quote on the phone is the price you pay, and the estimate is free. Call (877) 265-4385.
Service Areas Near Colma
We also run Schlage service calls in the towns ringing Colma: Colma service area calls often take us up into Daly City, and we work regularly in San Mateo and Hillsborough, where the residential Schlage trade picks up. Across the bay, Schlage service in Montalvin and Schlage service in Marin City draw on the same stock and the same approach to fog-belt lock failures.
Book Your Schlage Service in Colma Today
If a Schlage lock is sticking, seizing, or ignoring its keypad, call (877) 265-4385. We quote the full price on the phone, free estimate, no arrival surcharge. In Colma, we know what the fog does to your hardware. Know your hardware, know your options – the rest is just turning a key.
Written by Noel Carver, Owner at Cypress Lock & Key, serving Colma and the surrounding Bay Area since 2006.