Smart locks
House lockouts
Re-keying
Deadbolt upgrades
Schlage
Kwikset
Car keys & fobsNon-destructive entry first, always - and we re-key Schlage, Kwikset, and Baldwin locks on the spot while you watch
You get a price before we start. It does not change when we arrive. No surprises.
Get your free estimateMedeco Locksmith in Brisbane, CA | Cypress Lock & Key
We provide independent Medeco locksmith service across Brisbane, CA (94005), covering everything from seized cylinders to full rekeys and high-security deadbolt installation. What makes our Medeco work different here is that we understand Brisbane’s inverted hillside entries: the street-level door usually isn’t the main door, and it’s often the one carrying a neglected, corroded Medeco cylinder. Call (877) 265-4385 for a free estimate, and we’ll tell you on the phone what the job should cost before anyone rolls out. Brisbane runs on odd hours, and so do we.
Why Brisbane Residents Choose Us for Medeco Service
Medeco hardware shows up on Brisbane doors for a reason. People here want key control, and Medeco’s restricted keyway delivers it. What most folks don’t realize is that Medeco cylinders need a technician who actually works on them week in and week out, not someone who treats a high-security lock like a Kwikset with nicer branding. We’re an independent shop, not a Medeco dealer and not manufacturer-authorized, which means we diagnose the failing part honestly. If a cylinder can be cleaned, re-pinned, and re-keyed, we rebuild it. We only recommend replacement when the body or pin chambers are corroded past reliable service. Noel Carver, our owner and lead locksmith, has been working on restricted-keyway systems for going on two decades, and he’d rather rebuild a good Medeco than sell you a new one. That’s the difference between a locksmith who knows the hardware and one who just swaps parts. We also service the full Medeco sales & service range, so you’re not getting a shop that dabbles.
Styles & brands we work with
Common Medeco Locksmith Problems We Solve in Brisbane
- Corroded cylinders on west-facing hillside doors. Salt air off the bay and fog rolling through from SFO get into exterior Medeco cylinders on exposed doors, corroding pins and springs. The key drags, then the cylinder stops turning entirely even though the lock looks clean from the outside. We open, inspect, and either re-pin or replace just the worn internals.
- Deadbolts that won’t throw after winter rain. Wind-driven rain swells older wooden doors on steep Brisbane lots, and a Medeco Maxum deadbolt thrown out of strike alignment won’t extend without lifting or pushing the door. We reset the strike and adjust the bolt alignment, then verify the cylinder isn’t fighting the door frame.
- Retrofitted Medeco cylinders in worn original locks. In 1940s-to-1970s homes, a Medeco cyclinder dropped into an old mortise or cylindrical lock develops sloppy tailpiece engagement over time. The bolt half-throws, jams, or the key spins without turning the mechanism. We rebuild the tailpiece connection and re-time the cylinder.
- Restricted keys lost in rental turnover. High-turnover multifamily units near the BART/Caltrain corridor mean landlords in Brisbane lose track of who holds restricted Medeco keys. You can’t copy a restricted key at the hardware store, so the fix is re-pinning the cylinder and rebuilding key control, then cutting new keys only for approved holders.
- Lockouts at hillside utility doors. The street-level door on many Brisbane hillside homes is a lower-level utility entry, not the front door you actually use. That’s usually where the neglected Medeco cylinder lives, and it’s the one that seizes. We free it, re-pin it, and get you back inside without damaging the surrounding hardware.
Medeco Service in Brisbane: What Local Conditions Mean for Your Equipment
Brisbane’s hillside lots create a specific failure pattern we don’t see in flat neighboring cities like San Mateo or Daly City Medeco service areas. On a steep lot off Kings Road, the door at street level is often a lower utility entry below the main living floor, and the actual front door is up an exterior stair. That street-level door is exposed to the worst of the bay fog and afternoon wind, and because residents rarely use it, the Medeco cylinder on it gets no exercise. Locks need movement to stay free. A Medeco Biaxial deadbolt that sits untouched for months on a west-facing utility door collects salt and moisture inside the cylinder, and one day the key won’t turn at all. By the time we get the call, the homeowner is locked out of the one door they didn’t think about. This inverted-entry pattern is a Brisbane-specific problem, and it changes how we approach Medeco service here: we check both cylinders, not just the one that failed, because the upstairs Maxum is usually fine while the downstairs Biaxial is the one corroded. We re-key both to one restricted key so you’re not carrying two different Medeco keys for two doors on the same house.
Medeco Models & Products We Service in Brisbane
We work on the classic Medeco original pin-tumbler cylinders, Biaxial deadbolt cylinders, M3 and M4 high-security cylinders, and the full Maxum deadbolt line. Our inventory for Brisbane jobs includes genuine Medeco pins, springs, and cylinders, plus quality aftermarket hardware for purely mechanical pieces like strikes and reinforcement plates where the Medeco restricted keyway isn’t a factor. If you have an M4 cylinder that’s dragging, we stock the internals to rebuild it locally, which usually means a same-visit repair instead of waiting on a special order. For deadbolt installations on older Brisbane doors, we carry reinforcement plates that fit non-standard mortise and cylindrical prep from the 1950s and 1960s.
Medeco Service Pricing in Brisbane
Medeco work in Brisbane typically runs $140 to $220 for a cylinder re-pin and re-key, $175 to $285 for a full deadbolt installation including cylinder prep, and $110 to $190 for a diagnostic call that ends in freeing a seized cylinder without new parts. Emergency lockout response on a hillside home adds a service-call component we’ll quote before dispatch. Every job gets a firm price on the phone first, and that’s the price on the invoice. We don’t do bait pricing, and we don’t add a surprise surcharge on arrival. If you have a Medeco cylinder that’s been acting up on a street-level door, call (877) 265-4385 and tell us what it’s doing. We’ll give you a real number before we send anyone out.
Serving Brisbane, CA — Our Local Coverage Area
We’re based in the Brisbane area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Medeco Locksmith in Brisbane
No, and neither can anyone else, not without your authorization card. That’s the point of Medeco’s restricted keyway. What we can do is re-pin the cylinder and cut new restricted keys from your existing working key, so you get copies without losing key control. Call (877) 265-4385 if you need extra keys and still have one that works.
That’s the Brisbane inverted-entry pattern we see constantly. The street-level door on a hillside home is usually a lower utility door exposed to bay fog and salt air on the west side, and because you rarely use it, the cylinder never gets exercised. Pins and springs corrode, and the key drags or stops turning. We open, clean, and re-pin that cylinder, then check the upstairs Medeco too, just as we do for Medeco repair in Visitacion Valley hillside homes. Call (877) 265-4385 for an estimate.
Usually yes, but it depends on the mortise body’s condition. A worn 1950s mortise lock with a Medeco cylinder retrofitted into it will develop tailpiece engagement problems over time unless the lock body is rebuilt along with the cylinder. We service both, so one call covers the Medeco cylinder and the original mortise hardware it’s mounted in.
Re-pin the cylinder and rebuild key control. You can’t copy a restricted Medeco key, but that doesn’t help you if a former tenant still holds an original. We re-pin the cylinder to a new keyway configuration, cut new restricted keys for authorized holders only, and hand you a written count of every key that exists. For rental properties near the BART/Caltrain corridor, this is the most cost-effective security move between tenants. Call (877) 265-4385 and we’ll scope the job over the phone.
Yes. We’re an independent locksmith shop that services Medeco cylinders every week, and we have no affiliation with or authorization from the manufacturer. That independence means we diagnose the actual failing part and quote a repair when a rebuild serves you better than a new lockset. We use genuine Medeco pins, springs, and cylinders wherever the restricted keyway matters, and quality aftermarket hardware for purely mechanical pieces. Know your hardware, know your options – the rest is just turning a key.
Service Areas Near Brisbane
We run Medeco service calls throughout the 94005 ZIP and into the surrounding bay-side communities. You’ll find us working in San Mateo and Mill Valley regularly, plus Hillsborough, Larkspur, and the hillside streets around Martinez. We also cover Brisbane service area work end to end, and for Medeco owners across the water we handle Medeco service in Tiburon and Medeco service in Ashland with the same independent, rebuild-first approach.
Book Your Medeco Service in Brisbane Today
Locked out of a hillside utility door, dealing with a seized cylinder, or just want your Medeco re-keyed after a tenant moved out? Call (877) 265-4385. We’ll give you a firm quote by phone, same-day service when the job needs it, and a technician who knows Brisbane’s doors and Medeco’s internals equally well, plus Medeco service in San Bruno when needed.
Written by Noel Carver, Owner at Cypress Lock & Key, serving Brisbane and the surrounding bay area since 2005.