Smart locks
House lockouts
Re-keying
Deadbolt upgrades
Schlage
Kwikset
Car keys & fobsNon-destructive entry first, always - and we re-key Schlage, Kwikset, and Baldwin locks on the spot while you watch
You get a price before we start. It does not change when we arrive. No surprises.
Get your free estimateKwikset Locksmith in San Bruno, CA | Cypress Lock & Key
We provide independent Kwikset locksmith service across San Bruno, CA (94066) – rekeys, deadbolt installation, lockouts, and SmartKey repairs on the hardware already in your doors. What makes our Kwikset work different here: we keep salvaged mortise cases from tear-downs on the truck, because so many San Bruno ranch homes still carry original 1950s lock bodies that no big-box store stocks a replacement for. That means we can often rebuild and rekey your existing Kwikset hardware instead of selling you a new door or a bored-out retrofit. Call us at (877) 265-4385 for a straight read on your lock before anyone is dispatched.
Why San Bruno Residents Choose Us for Kwikset Service
Noel Carver has been running lock calls in this part of the Bay Area for going on two decades now. He grew up around Key, CA, where nobody thought much about locks until something went wrong, and he shows up the same way for San Bruno customers: calm, direct, no upsell pressure. Our team works on Kwikset hardware every week here – Kwikset sales & service runs through everything from SmartKey cylinders to builder-grade knob locksets to the 1950s mortise bodies still sitting in original ranch doors. We also service Schlage, Baldwin, Yale, Sargent, Medeco, Mul-T-Lock, and Abloy, so we’re not a one-brand shop guessing at your lock. That range matters when a San Bruno home has a Kwikset deadbolt on the front, a vintage mortise on the side door, and a Baldwin handleset on the back. Know your hardware, know your options – the rest is just turning a key.
Styles & brands we work with







Common Kwikset Locksmith Problems We Solve in San Bruno
- SmartKey cylinders that seize or turn stiffly. San Bruno’s marine layer fog and damp Pacific air settle on south- and west-facing entry doors. The corrosion bloom on the cylinder face is the tell. We disassemble, clean, and lubricate the cylinder with graphite-free lube, then re-key it if the wafers are worn.
- Builder-grade Tylo and Cove knobsets with worn internals. The pot-metal mechanisms in these budget locksets wear out – the knob spins, the latch retracts halfway, or the key turns without throwing the bolt. We’ll tell you honestly when the internals are gone and a new Kwikset deadbolt is the cheaper long-run answer.
- Original 1950s mortise bodies that won’t index cleanly. In San Bruno’s post-WWII ranch tracts, repeated rekeys over 70 years wear the cam until the key turns without a solid throw. We rebuild and re-key these in place rather than pushing a swap.
- Retrofit Kwikset deadbolts that bind in fog season. A Kwikset deadbolt bored into an old mortise-prep door often has an off-center or oversized bore. The bolt drags, the strike misaligns, and the whole thing binds when damp air swells the door. We correct the bore and reset the strike.
- Kwikset keypad and electronic deadbolts that go dead. Near the Bayhill and transit corridor, moisture gets past the battery door and the motor stalls or the keypad dies. We troubleshoot the board, replace corroded battery contacts, and reseal the housing.
Kwikset Service in San Bruno: What Local Conditions Mean for Your Equipment
San Bruno’s 1950s ranch tracts were built fast and nearly all at once, which means a single block often has dozens of doors cut for the same original mortise body. That’s not true a few miles south in South San Francisco Kwikset service territory or San Mateo, where housing stock is more varied by decade. Here in the 94066 flats near San Bruno City Park, you’ll find entire stretches of El Camino-adjacent homes where the front door still carries the first lockset the house ever had. The mortise case isn’t stocked by Home Depot or Lowe’s, and no mobile locksmith without salvaged stock can match one in place. We keep a box of salvaged mortise cases from tear-downs on the truck for exactly this reason. Matching the original case means the homeowner keeps their door, their trim, and their existing Kwikset key – instead of buying a whole new door or a bored-out retrofit that never sits right.
On a ranch house off the 94066 flats near San Bruno City Park, the front door still had its original 1950s mortise body that had been rekeyed so many times the cam was worn and the key turned without a solid throw. Rather than cut a new bore, our tech pulled a matching salvaged mortise case from the truck, rebuilt it, and re-keyed it to the homeowner’s Kwikset key, then lubricated and adjusted the strike so the door latched cleanly against the fog-damp swell. We also re-keyed the worn builder-grade Kwikset knobset on the back door in the same visit and flagged the corroded cylinder face on the west-facing side door for a follow-up.
Kwikset Models & Products We Service in San Bruno
We work on Kwikset SmartKey deadbolts (single-cylinder and keyed-entry handlesets), Tylo and Cove builder-grade knob and lever locksets, 660-series single-cylinder deadbolts, and Signature Series handlesets plus electronic keypad deadbolts (914 and 916-style). For repairs we use genuine Kwikset cylinders and rebuild kits where the lock body is sound, and matched quality aftermarket mortise and latch parts when the original is out of production. On vintage mortise cases we rebuild and re-key rather than push a replacement; on worn builder-grade knobsets we tell you plainly when the internals are gone. This is independent Kwikset service – we’re not affiliated with or authorized by Kwikset, which means we fix what’s broken instead of steering you toward a full hardware swap.
Kwikset Service Pricing in San Bruno
Kwikset locksmith work in San Bruno typically runs $85 – $160 for a standard rekey (including the new key cut), $120 – $220 for deadbolt installation depending on whether the bore needs correction, and $60 – $110 for a residential lockout. Mortise rebuilds and SmartKey cylinder repairs fall in the $140 – $250 range, because they’re labor-heavy and involve salvaged or specialty parts. The quote we give you on the phone before dispatch is the price on the invoice – no call-out surcharge added on arrival, no bait figure that triples once the tech is in your driveway. Call (877) 265-4385 for an exact quote; estimates are free and we’ll tell you straight if a repair is worth doing.
Serving San Bruno, CA — Our Local Coverage Area
We’re based in the San Bruno area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Kwikset Locksmith in San Bruno
Yes, in most cases. We rebuild and re-key original mortise bodies in place, using salvaged mortise cases from tear-downs when the internal cam is worn beyond service. The key turns solid again without cutting a new bore or replacing the door. We also handle Kwikset service in Pacifica. Call (877) 265-4385 and we’ll tell you what your lock actually needs.
San Bruno’s marine layer fog keeps west-facing door hardware damp, and that moisture corrodes the SmartKey cylinder face and gums the internal wafers. The fix is a graphite-free cleaning and lubrication, plus a re-key if the wafers have worn from forcing the key through the resistance. Ignoring it makes the cylinder seize eventually, and a seized SmartKey can’t be re-keyed – it has to be swapped. Call (877) 265-4385 for a same-day repair.
In most cases, replace. Tylo and Cove knobsets have pot-metal internals that strip, and once the knob spins without retracting the latch, the mechanism is gone. We stock the original 660-series deadbolts and keyed-entry knobsets, and we’ll tell you flat-out if a repair is throwing money away. Call (877) 265-4385 and we’ll quote the replacement before we come out.
Yes. We re-key all standard Kwikset cylinders to a single key, including SmartKey deadbolts and keyed-entry knobsets, so one key runs your front door, back door, side door, and detached garage. If one lock has an incompatible cylinder, we’ll tell you up front and quote the swap. Call (877) 265-4385 for a free estimate.
Yes, with a caveat. Older San Bruno ranch doors with original mortise preps often need the bore corrected and the strike realigned before a keypad deadbolt will sit flush and throw cleanly. We do that prep as part of the install, and we reseal the battery housing so the marine damp doesn’t kill the electronics in a season. Call (877) 265-4385 and we’ll scope the door before you buy the hardware.
Service Areas Near San Bruno
We serve San Bruno and the surrounding communities including San Mateo, Hillsborough, Millbrae, and South San Francisco. If you’re in a neighboring area, San Bruno service area details are here. For Kwikset work further afield, we offer Kwikset service in Contra Costa Centre and Kwikset service in Waldon.
Book Your Kwikset Service in San Bruno Today
Call Cypress Lock & Key at (877) 265-4385 for a free estimate on any Kwikset lock in San Bruno or Kwikset repair in Brisbane. Same-day service is available for lockouts and urgent repairs, and we’ll give you the full price on the phone before anyone is dispatched.
Written by Noel Carver, Owner at Cypress Lock & Key, serving San Bruno since the early 2000s.