Smart locks
House lockouts
Re-keying
Deadbolt upgrades
Schlage
Kwikset
Car keys & fobsNon-destructive entry first, always - and we re-key Schlage, Kwikset, and Baldwin locks on the spot while you watch
You get a price before we start. It does not change when we arrive. No surprises.
Get your free estimateMedeco Locksmith in Campbell, CA | Cypress Lock & Key
We provide independent Medeco locksmith service across Campbell and nearby areas like Cambrian Park Medeco service, from rekeying restricted-keyway cylinders to repairing Maxum deadbolts on older bungalows. The Medeco work we do here differs from neighboring cities because of what downtown Campbell actually throws at a locksmith: vintage mortise pockets, mismatched front-and-back door keying, and winter condensation that seizes rotating-pin internals. If you own Medeco hardware in Campbell and the key turns hard or you need a rekey without the original key-control card, call us at (877) 265-4385. Noel Carver runs our shop with a simple approach: know the cylinder, fix the cylinder, don’t upsell the hardware.
Why Campbell Residents Choose Us for Medeco Service
Cypress Lock & Key works on Medeco restricted-keyway and high-security hardware every week. Pinning, rekeying, and retrofitting Medeco cylinders into the vintage mortise locks and builder-grade doors that make up Campbell’s housing is routine for us, not a special order. We are an independent locksmith shop, not authorized, sponsored, or endorsed by Medeco. Our expertise comes from hands-on cylinder work, not a factory badge. We carry genuine Medeco pins, springs, and keys for restricted-keyway jobs so the key-control integrity holds. Noel Carver completed a locksmithing and security systems program at Fresno City College and has been running calls in this part of the valley for going on two decades. He shows up calm. That matters when a Medeco lock has a seized cylinder and you need a straight read on repair versus replacement. Our full Medeco sales & service capability spans the Maxum deadbolt, Biaxial, M3, and classic original cylinders, and we work on the lock you already have before suggesting new hardware.
Styles & brands we work with
Common Medeco Locksmith Problems We Solve in Campbell
- Winter rain and condensation gumming up exterior cylinders. Campbell’s mild but damp winters put moisture into outdoor Medeco cylinders on older homes. The rotating-pin internals seize long before the finish shows wear. We disassemble, clean, lubricate, and re-pin rather than selling a replacement.
- Restricted-keyway cylinders with no key-control card on file. A prior owner installed a Medeco cylinder and never transferred the card. Rekey means decoding and re-pinning from scratch, plus cutting new keys on the correct restricted blank. We handle that routinely for Campbell homeowners who inherited hardware they can’t get duplicated anywhere else.
- Medeco cylinders dropped into pre-1950 mortise pockets. Downtown Campbell bungalows often have original mortise locks where a previous owner wedged in a high-security cylinder that couldn’t properly accept the bolt throw. The bolt binds, the key turns hard, and the door won’t latch. We hand-fit the mortise pocket and strike so the bolt throws smoothly.
- Worn or mismatched keys cut on the wrong blank. Medeco keys are keyed to a specific angle system. A key cut on the wrong blank for the patented keyway won’t lift the pins cleanly, and the lock feels broken when it just needs a correct-cut key and a relube.
- Front and back doors keyed differently from decades of owners. The classic Campbell Medeco job is unifying a half-dozen mismatched locks on one property onto a single restricted key. We rekey every cylinder on site and cut new keys from the same controlled blank.
Medeco Service in Campbell: What Local Conditions Mean for Your Equipment
Campbell’s downtown core around the historic Orchard City and Pruneyard area is dense with 1910s to 1940s California bungalows that still carry their original mortise locksets. A front-door mortise lock plus a separately-keyed back door from decades of owners is the norm, not the exception. Pre-1950 door prep sometimes won’t accept a standard retrofit Medeco deadbolt without chiseling out the original mortise pocket, and we have done enough of those hand-fits to know exactly how much wood to remove and how to reset the strike so the restricted bolt throws clean. Meanwhile, the southern and eastern edges toward San Tomas and Apricot hold 1950s to 1970s ranch tract homes with builder-grade knob-and-deadbolt sets, and the newer townhomes near the Pruneyard and along the light rail corridor lean on smart locks and master-keyed commercial hardware. We also handle Medeco in Saratoga for homes with similar mixed-era hardware. Half this town is a rekey-and-restore job and half is a fresh-install job. A Medeco owner in downtown Campbell faces a different set of problems than someone in a newer complex, and we service both.
Medeco Models & Products We Service in Campbell
We service the Medeco Maxum deadbolt, the Biaxial 5-pin cylinder, the M3 / Medeco³ restricted-keyway cylinder, and the original classic high-security cylinder. For restricted-keyway work we use genuine Medeco pins, springs, and keys so the key-control integrity holds. For non-restricted doors where a customer wants a lower-cost option, we offer quality aftermarket cylinders and say so plainly before any work begins. On vintage mortise bodies we repair and re-pin the existing cylinder whenever the case is sound rather than pushing a full lockset replacement. We stock common Medeco pin kits, springs, and key blanks for faster turnaround on Campbell jobs, and we cut restricted keys on site once key-control authorization is verified.
Medeco Service Pricing in Campbell
Medeco rekey service typically runs between $35 and $80 per cylinder depending on cylinder type and key-control file status. Standard mortise lock rekey and repair on an older Campbell bungalow runs $65 to $150, while new Medeco Maxum deadbolt installation ranges from $95 to $250 plus hardware. Decoding and re-pinning a restricted-keyway cylinder without a key-control card runs $45 to $100 per cylinder. The full price is quoted on the phone before anyone is dispatched, and that is the price on the invoice. No call-out surcharge added on arrival. Call (877) 265-4385 for an exact quote; estimates are free and take about ten minutes.
Serving Campbell, CA — Our Local Coverage Area
We’re based in the Campbell area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Medeco Locksmith in Campbell
Yes. We decode the existing cylinder, re-pin it to a new restricted key, and establish key-control documentation going forward. Many Campbell homeowners inherit Medeco hardware without the card, and the rekey is the same hands-on process whether the file exists or not. Call (877) 265-4385 and we’ll walk you through what we need to verify before starting.
Often yes, but pre-1950 doors sometimes need the original mortise pocket chiseled out and the strike reset so the bolt throws clean. We hand-fit rather than forcing hardware into a pocket that binds. On a 1920s bungalow off Campbell Avenue near downtown, our tech found a Medeco Biaxial cylinder a previous owner had wedged into the original mortise pocket, and the bolt was binding so hard the key barely turned—a problem we’ve also solved through Monte Sereno Medeco service on similar vintage homes. We pulled the cylinder, re-pinned it to the customer’s existing restricted key, lubricated the rotating pins, and hand-fit the strike and mortise pocket so the bolt threw smoothly, then matched the separately-keyed back-door cylinder so one Medeco key worked both doors.
No. Winter rain and condensation rust and gum up exterior Medeco cylinders on Campbell’s older bungalows, and the rotating-pin internals seize long before the finish shows wear. We disassemble, clean, lubricate, and re-pin the existing cylinder. Replacement is the last option, not the first. Call (877) 265-4385 for a quick diagnostic.
Yes. That is the most common Medeco job we do in Campbell. We rekey every cylinder on the property, including front mortise locks, back-door deadbolts, and any gate or side-door hardware, onto a single restricted key. You keep the key-control card and the assurance that no one is walking around with an old key to a half-dozen mismatched locks.
We work on Medeco hardware anywhere in Campbell, including the newer townhome and apartment complexes near the Pruneyard and along the light rail corridor. Those properties lean on master-keyed commercial hardware and smart locks, and we service both alongside the vintage mortise work downtown. Our Campbell service area covers all three ZIP codes: 95008, 95009, and 95011.
Service Areas Near Campbell
We run Medeco calls throughout Campbell and into the surrounding communities. If you’re in San Mateo, Mill Valley, Larkspur, Hillsborough, or Martinez, we can often route a technician your way the same day. We also provide dedicated Medeco service in Penngrove and Medeco service in Yountville for clients with properties in those areas. Know your hardware, know your options – the rest is just turning a key.
Book Your Medeco Service in Campbell Today
Call (877) 265-4385 for a free estimate on any Medeco rekey, repair, or deadbolt installation in Campbell. We quote the full price on the phone before dispatch, and that price is what you see on the invoice. Same-day service is available for most Campbell jobs.
Written by Noel Carver, Owner at Cypress Lock & Key, serving Campbell since 2005.