Smart locks
House lockouts
Re-keying
Deadbolt upgrades
Schlage
Kwikset
Car keys & fobsNon-destructive entry first, always - and we re-key Schlage, Kwikset, and Baldwin locks on the spot while you watch
You get a price before we start. It does not change when we arrive. No surprises.
Get your free estimateSchlage Locksmith in Fremont, CA | Cypress Lock & Key
We provide independent Schlage lock service across Fremont and nearby, from Schlage service in Newark to rekeying a B60 deadbolt in Warm Springs or converting a century-old mortise lock in Niles. The thing that makes our Schlage work different here is that we’ve spent years tearing down and rebuilding these cylinders in this exact housing mix, so we know which parts fail in which Fremont neighborhood and why. If your Schlage lock is sticking, spinning, or simply needs rekeying, call (877) 265-4385 and we’ll give you a straight answer before anyone rolls a truck.
Why Fremont Residents Choose Us for Schlage Service
We work on the lock you already have. That sounds simple, but most locksmiths in the East Bay treat Schlage as a commodity product, something you swap out when it misbehaves. We don’t. Noel Carver, our owner and lead locksmith, has been running calls from Union City Schlage service to Fremont for going on two decades, and he’ll tell you plainly that a Schlage body is rarely the problem. The cylinder, cam, and bolt wear out. Those we can rebuild or rekey for a fraction of what a new lock costs.
Because we’re an independent Schlage service provider, not a manufacturer shop, we can give Fremont homeowners an honest read on every job. Is your B60 worth rebuilding? Should that 1972 F-Series knob finally get retired? No sales quota behind the answer. We stock genuine Schlage OEM cylinders, pin kits, and latches for supported model lines, and we carry quality aftermarket equivalents for the discontinued hardware that still shows up in older Centerville and Irvington tracts. For a deeper look at our brand coverage, see our Schlage sales & service page.
Styles & brands we work with







Common Schlage Locksmith Problems We Solve in Fremont
- Grit-clogged B60 exterior cylinders. Fremont sits in a rain-shadowed valley, and the wind-blown dust off the Mission Peak foothills works its way into exterior deadbolts. The pin stack loads up with fine grit, and the lock starts feeling sandy, then stiff, then it won’t turn at all on a hot day. We disassemble, clean, and lubricate these cylinders with graphite-free lubricant so the pins move cleanly again.
- Worn F-Series knob spindles and cams on 1960s-70s tract homes. In Centerville and Irvington, those original Schlage F51 and F10 knobs have been turned tens of thousands of times. The spindle wears, the cam slops, and eventually the knob spins without retracting the latch, or the latch catches halfway. A rekey won’t fix a worn cam. We replace the worn internals and rekey to match your existing keys, no new hardware on the door.
- Schlage Encode and Sense smart lock faults in 94538 townhomes. Newer tech-corridor developments near BART run a lot of Schlage smart locks, and we see the same three issues over and over: a lock that won’t stay paired to the hub, a dead battery that faults the bolt, or a motorized bolt that jams against a door frame that has settled. Usually it’s alignment or firmware, not the lock itself. We diagnose before we replace.
- Forced Schlage deadbolt installs on historic Niles and Mission San Jose doors. Original Victorian and bungalow doors have thicker, out-of-square stiles and skeleton-key mortise locks already cut into the wood. A standard B60 won’t seat cleanly, the screws strip, and the bolt binds. We machine custom cylinders and fit escutcheon plates so the Schlage deadbolt works with the existing mortise instead of against it.
- Rekey after tenant turnover or key loss across Fremont’s rental and landlord market. Property managers running single-family rentals in Warm Springs and townhome complexes in 94539 call us between tenants. Rekeying a Schlage is a quarter of the cost of replacing it, and we can do an entire property in one visit.
Schlage Service in Fremont: What Local Conditions Mean for Your Equipment
Here’s something a generic Schlage page or a generic Fremont locksmith page won’t tell you. Fremont’s rain-shadowed East Bay valley means exterior Schlage cylinders here dry out and load up with Mission Peak foothill grit rather than corrode from damp like locks across the bay in San Mateo or up in the Marin hills. A locksmith in Mill Valley schedules moisture-driven service, pulling corrosion out of cylinders that have been sitting in fog and drizzle. That’s not the problem in Fremont. Our exterior locks fail from abrasion. Fine dust from the open space around Mission Peak gets carried by afternoon wind into the keyway, and every time a key is inserted, that grit works deeper into the pin stack. The result is a Schlage deadbolt in Warm Springs that feels like it’s full of sand by August. So when we service a Fremont lock, we plan annual graphite-free cleaning and lubrication for exterior deadbolts, not the moisture-driven maintenance a Peninsula locksmith would recommend. For Fremont coverage across all our services, see our Fremont service area page.
Schlage Models & Products We Service in Fremont
We service the full Schlage lineup you’re likely to find in Fremont housing stock. The B60 and B62 single-cylinder deadbolts are the default on 1990s-2000s townhomes throughout 94538 and 94539. The F-Series knobs and leversets, F51 and F10, show up on the 1950s-70s single-family tracts in Centerville and Irvington. On newer tech-corridor homes, we work on Schlage Encode and Sense smart locks regularly. And for small Fremont businesses with commercial front doors, we service Schlage ND-Series cylindrical locksets. We use genuine Schlage OEM cylinders, pin kits, and latches wherever the model line is still supported, and we only turn to quality aftermarket equivalents for discontinued or hard-to-source older hardware. We stock common Schlage parts on the truck, which means most Fremont calls are one visit.
Schlage Service Pricing in Fremont
Schlage rekeying in Fremont typically runs $90 to $180 depending on the number of cylinders and the model line, while a full deadbolt replacement with new Schlage hardware lands between $180 and $340 installed. Smart lock installation for Schlage Encode or Sense runs $150 to $300 plus the lock itself. What drives the cost here is rarely the labor; it’s whether your cylinder needs a full rebuild with OEM parts or just a rekey, and whether the door prep needs adjustment. A free estimate means we tell you the exact number before anyone is dispatched, and that number is the price on the invoice, no call-out surcharge added on arrival. Call (877) 265-4385 for an exact quote, estimates are free.
Serving Fremont, CA — Our Local Coverage Area
We’re based in the Fremont area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Schlage Locksmith in Fremont
Yes, and we’ve done it many times. These historic doors need a custom cylinder and an escutcheon plate fitted so the Schlage deadbolt seats against the thicker, out-of-square stile without stripping screws or binding the bolt. A standard B60 alone won’t work. We cut the cylinder on site and tie the Schlage into the existing mortise without altering the door’s historic face.
Fremont’s problem isn’t moisture, it’s the rain-shadowed valley and Mission Peak foothill grit that blows into exterior cylinders and loads up the pin stack. Locks across the bay corrode; ours abrade. Annual graphite-free cleaning and lubrication handles it, and we recommend it for any east-facing or exposed deadbolt in Fremont. Call (877) 265-4385 and we’ll schedule a cleaning before the next hot stretch.
Usually not. We see pairing faults from hub interference and dead-battery faults that throw the motorized bolt out of alignment, and we see motorized bolts jam against settled door frames in these townhome developments. Alignment and firmware fixes solve most of these jobs. We diagnose before recommending replacement, because throwing a $250 smart lock at a frame issue won’t fix anything.
Yes, rekeying runs $90 to $180 in Fremont, while replacing the full knob or deadbolt costs $180 to $340 or more. On a 1960s Irvington home with original F-Series hardware, rekeying is almost always the right financial call if the cam and spindle are still sound. If they’re worn, a rebuild with new internals is still cheaper than full replacement. Call (877) 265-4385 and we’ll tell you which one your lock needs, free estimate, no dispatch charge.
We do. Our trucks carry OEM cylinders, pin kits, and latches for B60 and B62 deadbolts, F-Series knobs and leversets, and common smart lock components for Encode and Sense hardware. For discontinued older Schlage parts we source quality aftermarket equivalents, so a 1950s Centerville knob or Schlage in Fairview hardware doesn’t have to become a replacement project just because a cam wore out.
Service Areas Near Fremont
Our Fremont service covers 94537, 94538, 94539, and 94555. We also run Schlage calls in nearby communities: Schlage service in Pleasanton for the 1960s-80s tract stock there, and Schlage service in El Granada where coastal air changes the wear pattern on exterior locks. San Mateo, Martinez, and Hillsborough calls are within our service radius as well.
Book Your Schlage Service in Fremont Today
If your Schlage lock is sticking, spinning, or you simply need new keys in the same hardware, call (877) 265-4385. We’ll quote the full price on the phone, and if it’s urgent we’ll get to you the same day. Know your hardware, know your options, the rest is just turning a key.
Written by Noel Carver, Owner at Cypress Lock & Key, serving Fremont since two decades of locksmith work in the East Bay.